 |
 |
 |
 |
Metal Protection > ProtecRite® > 7316 Clear
| PRODUCT DESCRIPTION | |
| A 3 mil LDPE product engineered for protection of textured surfaces or surfaces requiring a higher adhesion product during shipping and/or moderate fabrication. The acrylic adhesive system offers a "high adhesion" product with minimal adhesion build. | |
| SUGGESTED END USE | |
| HP Laminate/Textured, Fabricating Laminates/Satin, Painted "Textured" Steel Aluminum | |
| FEATURES | BENEFITS |
| Removable | Clean, stain free removal... even after application for extended time periods. |
| Conformable | Product remains intact... even during excessive bending. |
| Easy application | The controlled unwind allows for application using either manual or automatic methods. |
| PRODUCT SPECIFICATIONS | |
| Total thickness | 2.8 mils |
| Tensile strength | 8 lbs/inch |
| Elongation | 325% |
| Standard roll width (inches) | 36", 48", 60" |
| Standard roll length (yards) | 200, 334, 500, 1000 |
| Backing | LDPE |
| Adhesive type | Acrylic |
| Color | Clear |
| Adhesion, anodized alum | 16 oz/inch |
| The performance of all adhesive products is affected by many factors: heat, humidity, type of substrate, texture, inks used and application technique. Our suggestions and recommendations concerning the use and application of our products are based on tests we believe are reliable. However, the purchaser must test the suitability of our products for their intended use under their own operating conditions. Protective Packaging assumes no liability for claims beyond the replacement value of any defective products, and is in no way liable for consequential or incidental damages. These products are not suitable for prolonged outdoor exposure. | |
© 2002 Protective Packaging Limited
Canada
Website Design & Maintenance by Gutlevel.com
